Back to Topic Listing Switch to

[ Post New Message | Reply | Edit Profile | Register | Search | Current Connections | Message Board FAQ | Lost Password? ]

 << Previous Thread - auto trans scurging   Next Thread - Varying RPM's >> 
Fixing up the front end.

Posted By: cypher_2001 On: 03-19-2010 @ 15:35:57         Reply | Edit
If I get time this weekend, I'm going to be replacing outer tie rods, upper and lower control arm bushings, ball joints, and my squeaky ass idle tensioner pulley.

I haven't replaced control arm bushings on a Camaro yet, but I know they are a pain in the ass on other cars to remove and re-install. Any tips or secrets you guys know about?

Also, the ball joints are going to be horrid, any tips for these?
--
NIHILIST AND PROUD!
F*CK IT ALL!
 << Previous Thread - auto trans scurging   Next Thread - Varying RPM's >> 

Reply to this Message
UserName: [ Not a member? Register here! ]
Password: [ Edit Profile ] [ Logout ]
Message:

Check the box to be notified via e-mail when a reply is posted to this thread. Members who are logged in can enable the notify option without posting a message.
Use Signature:

Back To Topic List
If it looks (c) it probably is - All work done by James Hogan