|
|
Back To Install Guide List
| MAF Screen Removal |
| Category: |
Air Induction |
| Difficulty: |
3 |
| Approximate Time: |
30 minutes |
| Application(s): |
94-97 LT1 |
| Added By: |
shocktrp |
| Last Updated: |
2002-06-05 15:06:50 |
| Views |
17998 |
|
Tools Needed:
Flat head screwdriver
Knife(optional)
Parts Needed:
N/A
Purpose:
Flow more air into TB.
How - To:
Step 1
Remove the clamps holding the MAF between the bellows & airbox. Unplug MAF & remove from vehicle.
Step 2
Place MAF on workbench or other flat surface. Be VERY careful not to break the wires inside the MAF & gently pry screen out of MAF with screwdriver or knife.
Step 3
Reinstall it the same way it came out.
Comments:
THIS IS NOT THE PLACE FOR QUESTIONS!!
Questions should be posted on the message board or emailed to the person who created this guide. Comments should ONLY be used to add information such as notes and more information for poorly edxplained steps or notes on parts/tools/steps etc.
| Posted By: Jim_Hogan | Last Updated:2002-05-14 00:58:06 |
| The MAF sensor IS directional. You should notice a sticker on the side of the MAF that indicates the direction air should flow. DO NOT put the MAF back on backwards. |
| Posted By: NDame616 | Last Updated:2002-06-03 00:06:00 |
| How much HP do you gain? |
| Posted By: LuS1fer | Last Updated:2002-07-10 07:13:24 |
| If a mesh screen behind the seats on a car stops turbulence, surely removal of the honeycomb screen creates turbulence?? |
| Posted By: Buda2832 | Last Updated:2004-09-20 03:03:06 |
| great mod, I gain 1 PSI at the intake at idle.
yes, it stops turbulence and strightens air flow,but with everything stock for the intake, how stright is that air after taking that 90 degree bend after the MAF? |
| Posted By: Rookie_mechanic | Last Updated:2004-10-01 14:56:00 |
| I looked at this screen and mine had what looked like a couple small rocks stuck in it! I checked for leaks and made sure the intake and airbox were good as well as the air filter. All seemed fine. I think I will leave mine in. |
| Posted By: z28sc350 | Last Updated:2004-10-06 23:28:18 |
| that up grade works well my stock z28 smokes stock ss camaros |
Back To Install Guide List
Edit information - You MUST be logged in as the user who added this Installation Guide to Edit the Information
|
|
|
