|
|
Back To Install Guide List
| Headrest Installation |
| Category: |
Appearance |
| Difficulty: |
5 |
| Approximate Time: |
25 min |
| Application(s): |
4thgen F-body |
| Added By: |
terry99ta |
| Last Updated: |
2002-03-31 13:25:15 |
| Views |
8663 |
|
Tools Needed:
#2 phillips screwdriver
Parts Needed:
none
Purpose:
they look awesome
How - To:
Step 1
I embroider pontiac headrests and get people wanting to know how to remove/install them. www.geocities.com/birdheadrest
to remove headrest covers
1. remove the 2 seatbelt holder screws
2. raise headrests to highest position
3. unclip black plastic clip on bottom
4. heat with a hair dryer evenly
5. raise each side up about 1" at a time until off
to reinstall them
1. start reinstalling each side about 1" down
2. heat with hair dryer
3. pull down each side one side at a time in about 1" increments until all the way on.
4. re-clip black plastic clips on bottom
5. reinstall seatbelt holder
done!
Comments:
THIS IS NOT THE PLACE FOR QUESTIONS!!
Questions should be posted on the message board or emailed to the person who created this guide. Comments should ONLY be used to add information such as notes and more information for poorly edxplained steps or notes on parts/tools/steps etc.
Back To Install Guide List
Edit information - You MUST be logged in as the user who added this Installation Guide to Edit the Information
|
|
|
