Back to Topic Listing Switch to

[ Post New Message | Reply | Edit Profile | Register | Search | Current Connections | Message Board FAQ | Lost Password? ]

 << Previous Thread - Clutch Fork Groove?   Next Thread - Need some help.... >> 
Really need help with a repair

Posted By: thought_ignition On: 11-03-2009 @ 15:59:01         Reply | Edit
To make a long story short, it looks like my bottom power steering pump bolt came out, so the top one snapped. Anyway it is stuck in the aluminum bracket and I tried the drill / easy out method. Due to the angle it didn't work to well. Does anyone know how hard it is to take the big cast aluminum bracket for the power steering pump out? Besides the Power steering pump and alternator, what else is bolted to this bracket?

Normally back in Wisconsin I'd just throw it on the lift in the shop and do what I do, but I'm out of resources here in So Cal. Please, any help is greatly appreciated because I get out of the Marines next month and will be driving the car back to Wisconsin (which is currently a problem due to it not running).

Thanks in advance, and I'm really looking forward to the help.
--
1968 Camaro RS/SS - the project
1996 Camaro Z/28 - the summer car
1997 Grand Prix GT - the daily driver
Posted By: RamAir95TA On: 11-03-2009 @ 16:02:26     Reply | Top | Edit
You'll need to remove the tensioner pulley and the A/C compressor as well, and then there are a series of bolts holding it to the engine.
--
95 T/A.
Got some stuffs that go vroom vroom. Video Clip.
11.1 @ 122
 << Previous Thread - Clutch Fork Groove?   Next Thread - Need some help.... >> 

Reply to this Message
UserName: [ Not a member? Register here! ]
Password: [ Edit Profile ] [ Logout ]
Message:

Check the box to be notified via e-mail when a reply is posted to this thread. Members who are logged in can enable the notify option without posting a message.
Use Signature:

Back To Topic List
If it looks (c) it probably is - All work done by James Hogan