Back to Topic Listing Switch to

[ Post New Message | Reply | Edit Profile | Register | Search | Current Connections | Message Board FAQ | Lost Password? ]

 << Previous Thread - LT1 or LT4 heads   Next Thread - which exhaust should i buy? >> 

air bag light

Posted By: 95camaross On: 10-22-2009 @ 21:50:18         Reply | Edit
I have a 1994 z-28 that has the air bag light on. It hasn't been in an accident or have i ran over rough terrain,curb, etc... I don't drive it much but the last two times i started it it comes on. When i turn the key on it flashes once,flashes once again and then goes solid. Can anybody tell me what the air bag codes are or what direction i should be looking in. I have already checked the connectors on my sensors with the batt off for 45 min before so, checked fuses, any help would be appreciated

Posted By: walt355 On: 10-23-2009 @ 15:04:56     Reply | Top | Edit
Get it scaned, Unless Im wrong there isnt much way to check Body Control stuff without a scantool.
--

Authorized Wrench turner
96' Camaro Z-28 M6 Forged 383 Lt1 w/TEA Stage 2 Heads.Workin on it >Check it out 11.58@120.33, 415WRHP/408RWTQ http://www.cardomain.com/id/waltsfastz
02' Camaro Z-28 A4 Convertable,Lakewood LCAs, Flowmaster catback> 13.5@103.89

Posted By: hotrodbob38 On: 10-30-2009 @ 18:39:52     Reply | Top | Edit
Im not sure if our cars have them, but most cars have sensors in the seats as well as seat belt retractors.. My dakota r/t airbag light kept coming on..It was the passenger side seat belt retractor sensor..Just had to pull the belt all the way out, then let it retract.. did it about 10 times..NO MORE LIGHT!! if the belt folds up, youll get the light..This is a common problem..
Not saying this is your problem, but start with the easy stuff first..

 << Previous Thread - LT1 or LT4 heads   Next Thread - which exhaust should i buy? >> 

Reply to this Message
UserName: [ Not a member? Register here! ]
Password: [ Edit Profile ] [ Logout ]
Message:

Check the box to be notified via e-mail when a reply is posted to this thread. Members who are logged in can enable the notify option without posting a message.
Use Signature:

Back To Topic List


If it looks (c) it probably is - All work done by James Hogan