| ||||
|
[ Post New Message | Reply | Edit Profile | Register | Search | Current Connections | Message Board FAQ | Lost Password? ]
New Issue Posted By: PCLZ28 On: 08-28-2009 @ 19:02:10 Reply | Edit Today my car ran fine until I went to stop. when the A/C is on it bogs down at idle and will actually die sometimes. Turn off the air and it's just fine. I just rebuilt the whole A/C system about two years ago. Put in a NEW compressor and all. Any suggestions? For those who don't know it's a 97 Z28, M6 Heads,cam, LTs ete,etc. --  Posted By: 94fireturd On: 08-29-2009 @ 16:53:24 Reply | Top | Edit Is it not idling up when the compressor is switched on? Has the Idle air control motor ever been replaced or cleaned? What codes is it throwing if any? Can you keep it running by giving it a little gas? -- 
1993 Z28: auto, 3.73's,LT4 HC, PCMforless, Hooker LT, 3" Y, single outlet 3" slowmaster w/cut-out,CAI, Tornado,MSD coil, TB bypass, 160* thermostat, !cat !EGR !AIR, SFC's, boxed LCA's & PHB, Heated o2 sensor conversion Posted By: PCLZ28 On: 08-29-2009 @ 21:38:12 Reply | Top | Edit Correct it doesn't idle up when the air kicks on causing it to bog.No codes yet. Yes you can give it gas and it is fine only does it at idle. What is the idle air control motor and where is it located? I know that sounds dumb but I don't know what that is. -- Posted By: 95ttoplt1 On: 09-02-2009 @ 22:30:01 Reply | Top | Edit under the throttle body. I small metal cylinder with a wire plug on the end. Its easiest just to pull off the throttle body and clean it all at once. Remove the IAC and clean that port out as well. They are know to get full of carbon in there. --  Posted By: PCLZ28 On: 09-03-2009 @ 06:14:36 Reply | Top | Edit Thanks again guys. --
|
||||
| If it looks (c) it probably is - All work done by James Hogan | ||||
