Back to Topic Listing Switch to

[ Post New Message | Reply | Edit Profile | Register | Search | Current Connections | Message Board FAQ | Lost Password? ]

 << Previous Thread - Crank Position Sensor / Reluctor ring   Next Thread - volt gauge >> 
Air Con Compressor

Posted By: terminal_crazy On: 05-11-2009 @ 11:37:30         Reply | Edit
Hi guys,

fired my '95 Z28 up the other day and it made a hideous noise. I thought it
was the alternator bearing but if i turn the air con off it goes off as the
clutch disconnects. Comes back if i turn it on again.

Any pointers etc.
Is it easy to fix or is it a new air con compressor.

Do I have to do anything special with replacement. Just remove & Replace it then get system pumped up at an air con garage?

Thanks
Mitch

--
terminal_crazy - '95 Z28 LT1 M6
Posted By: 95taredsled On: 05-11-2009 @ 15:42:44     Reply | Top | Edit
ac compresser is easy to get to from the bottom , but it is the freon and the mechanic ability you have as how easy it would be . try spraying a little wd 40 in the clutch not much let it run a bit and see if it clears up .
 << Previous Thread - Crank Position Sensor / Reluctor ring   Next Thread - volt gauge >> 

Reply to this Message
UserName: [ Not a member? Register here! ]
Password: [ Edit Profile ] [ Logout ]
Message:

Check the box to be notified via e-mail when a reply is posted to this thread. Members who are logged in can enable the notify option without posting a message.
Use Signature:

Back To Topic List
If it looks (c) it probably is - All work done by James Hogan