[ Post New Message | Reply | Edit Profile | Register | Search | Current Connections | Message Board FAQ | Lost Password? ]

You can try grinding down the calipers a bit but I still think you will end up having to run them. Switch to bogarts, I dont think they require you to run spacers.
--
94z28 13.0@109 (still tweaking) best 60ft:2.22

---

Posted By: 87bandit On: 02-01-2009 @ 11:20:50     Reply | Top | Edit

---

front runners HAVE to run a spacer unless your pads are very low, that is with correct bs though

rears do not require a spacer, just have to grind on the cooling fins on the caliper. 5.5 bs for 15x8 and 7.5 bs for 15x10
--

1994 Trans Am GT A4 - NOS Dry Kit, CC503, Comp 1.6 Magnum Rockers, K&N FIPK CAI, Trick Flow Elbow, 58mm TB, TP Built 4L60e, 3000 Stall, B&M Tranny Cooler, Pacesetter Midlength Headers, !EGR, !CAT, Cutout, Magnaflow Catback, M/T ET Streets, 30# SVO Injectors, Walbro 255lph, NGK TR6 Plugs, MSD 8.5mm Wires, Hypertech 160 Thermo, Manual Fan Switch, TB Bypass, LT4 KM, MAF Descreen, !Front Sway Bar, BMR Rear LCAs, MAC SFCs, Comp Engineering 3-way Adjustable Shocks, Energy Suspension Polyurethane Trans Mount, 3.73 gears

Best Time: 7.56 @ 91.14mph (stock cam, stock tune, shitty tires)

---

<< Previous Thread - Calling everyone with 425+hp and stock internals

Next Thread - Non D-Port Headers >>

Reply to this Message

UserName: [ Not a member? Register here! ] Password: [ Edit Profile ] [ Logout ] Message: Check the box to be notified via e-mail when a reply is posted to this thread. Members who are logged in can enable the notify option without posting a message. Use Signature: #1 #2 #3 None

Back To Topic List