| ||||
|
[ Post New Message | Reply | Edit Profile | Register | Search | Current Connections | Message Board FAQ | Lost Password? ]
ROCKER ARMS Posted By: batmanlt1 On: 05-10-2008 @ 11:38:41 Reply | Edit what kind of rocker arms is everyone using, and wat is good? how much increase in power should i expect and part numbers would help. its a 95 lt1 m6 My Caps Lock Button Is Broken Posted By: 94fireturd On: 05-10-2008 @ 20:21:07 Reply | Top | Edit depends on what your set up is going to be and what your trying to do with your car. Most people with aftermarket cams will run 1.6 ratio full roller rockers. They need to be self aligning or you will need pushrod guid plates. All in all your question is VERY vauge. Check out the search feature of this web site. http://www.fbody.com/cgi-bin/forum/search.cgi -- 
94 Formula: sold 00 WS6: sold 1993 Z28: CIA, Hooker LT's, Mufflex Y,!EGR!AIR!CATS Posted By: Calaban007 
On:
05-10-2008 @ 22:40:11 Reply | Top | Edit
From what I've read you can throw on a set of 1.6 rr with new springs with a stock setup and be OK. It will make the cam seem larger due to the larger ratio. Also, I've read that your oil temp will drop 20 or 30 degrees. Maybe some one with more experience will chime in with some input. -- 
1995 Camaro Z28, M6, T-Top Conversion & 1989 IROC-Z Stock restoration in progress, well almost stock 
http://www.myspace.com/163296073
|
||||
| If it looks (c) it probably is - All work done by James Hogan | ||||
