Back to Topic Listing Switch to

[ Post New Message | Reply | Edit Profile | Register | Search | Current Connections | Message Board FAQ | Lost Password? ]

 << Previous Thread - transmission cooler lines   Next Thread - Need some Procharger Info >> 

factory 94-95 LT1 dual fans

Posted By: 86Camarolt1 On: 01-17-2008 @ 10:17:25         Reply | Edit
anyone can tell me which side is positive/negative on the dual fan assembly that comes with the '95 LT1

Posted By: blackbird93  Yearly Donor since 01-28-2008 On: 01-17-2008 @ 11:00:51     Reply | Top | Edit
If you are asking about the wire colors, on my 93 the black wires are grounds. Light blue is for power to the primary(driver side) fan, brown is power to the secondary(passenger side) fan. I hope this helps, but I'm not sure if the color codes are the same over the years.

Posted By: 86Camarolt1 On: 01-17-2008 @ 17:27:00     Reply | Top | Edit
I need to know which terminals on the fan are positive/neg

Posted By: blackbird93  Yearly Donor since 01-28-2008 On: 01-17-2008 @ 18:27:57     Reply | Top | Edit
Without going outside in 15 degree cold and jacking the car up, I can't see the plugs on mine. If I had to figure it out, I'd take jumper wires and hitch the fan up to a battery to figure out the polarity to make it spin the right way. You won't hurt it if you guess wrong when testing, it'll just spin the wrong way.

Posted By: 86Camarolt1 On: 01-17-2008 @ 23:05:39     Reply | Top | Edit
kool, would you know if its suppose to spin clockwise or counterclockwise

Posted By: Injuneer On: 01-18-2008 @ 06:28:25     Reply | Top | Edit
Are the harness connectors marked with the "A" and "B" designations shown here:

http://shbox.com/1/fan_schematic_1995.jpg
--

Fred - 1994 Formula - 381ci / 275-shot N2O / TH400+GV
Mods: http://members.aol.com/InjuneerZZ/Mod.htm
Step into my office: http://www.injuneer.com/images/photos/Interior/DCP03464a.jpg

Posted By: 86Camarolt1 On: 01-18-2008 @ 09:32:35     Reply | Top | Edit
I am using a Painless harness and they have the grounded fan relay wires for when you install the fans,and you just run a hot wire to the positive side.

Posted By: blackbird93  Yearly Donor since 01-28-2008 On: 01-22-2008 @ 15:58:16     Reply | Top | Edit
If you havent figured it out yet, I just got done changing the oil in my TA, and I took a look at how the fans were wired. On mine the plug is on the back of the motor, towards the bottom, looking at the back of the fan the positive wire is to the right in the plug (- +).

Posted By: 86Camarolt1 On: 01-22-2008 @ 18:56:03     Reply | Top | Edit
gotcha

 << Previous Thread - transmission cooler lines   Next Thread - Need some Procharger Info >> 

Reply to this Message
UserName: [ Not a member? Register here! ]
Password: [ Edit Profile ] [ Logout ]
Message:

Check the box to be notified via e-mail when a reply is posted to this thread. Members who are logged in can enable the notify option without posting a message.
Use Signature:

Back To Topic List


If it looks (c) it probably is - All work done by James Hogan