| ||||
|
[ Post New Message | Reply | Edit Profile | Register | Search | Current Connections | Message Board FAQ | Lost Password? ]
ABS inop is on!! Posted By: jcraftz28 On: 01-04-2008 @ 16:30:05 Reply | Edit the ABS inop light came on the other night and stayed on. i tried turning the car off and on a couple times and it wouldnt go off. so whats the problem??? -- 1994 camaro z28 M6, 130k miles/http://www.cardomain.com/ride/2459821/ flowmaster, bbk headers, Moroso cold air intake, bbk throttle body 58 mm, Richmond 3.73 gear,MSD Ignition, MSD coil, no air pump, no cat, alum. driveshaft, drilled and slotted rotors... Posted By: 95ttoplt1 On: 05-18-2007 @ 16:45:03 Reply | Top | Edit Get the codes and it will tell you --  Posted By: walt355 On: 05-18-2007 @ 19:01:18 Reply | Top | Edit First you cam check the 5 amp ABS fuse in the fuse panel under the hood --  
Authorized MATCO tools distributor 96' Camaro Z-28 M6 Forged 383 Lt1 w/TEA Stage 2 Heads. Custom comp Cam >Check it out 11.58@120.33, 415WRHP/408RWTQ http://www.cardomain.com/id/waltsfastz 02' Camaro Z-28 A4 Convertable,Lakewood LCAs, Flowmaster catback> 13.5@103.89 Posted By: eliotz28 On: 05-18-2007 @ 21:03:37 Reply | Top | Edit check ur thrid brake light because if one of the bulbs is out, it will set off the ABS inop light on. -- 
MODS: Pacesetters LT, Magnaflow exhaust, PCM4LESS Performance tune, K&N CAI, Trick Flow Elbow, PRO 5.0 shifter, LT4 KM, TB air foil, TB bypass, manual fan switch, NEXT MOD: CAM  Posted By: eliotz28 On: 05-23-2007 @ 15:36:52 Reply | Top | Edit ^nope, I had my ABS INOP light come on when i run my car at night only, and that was just with the one bulb out of 2 in the third brake light. I replaced it and like magic, the light never came on. --
MODS: Pacesetters LT, Magnaflow exhaust, PCM4LESS Performance tune, K&N CAI, Trick Flow Elbow, PRO 5.0 shifter, LT4 KM, TB air foil, TB bypass, manual fan switch, NEXT MOD: CAM Posted By: ChazGotAZ28 On: 05-27-2007 @ 02:32:24 Reply | Top | Edit Mine always comes on after I go through emissions, but as soon as I turn the car off and back on it goes away. I always thought that was weird. -- 
Check out my car at http://www.cardomain.com/id/chazgotaz28 Posted By: SaD1ST1K On: 05-29-2007 @ 00:34:14 Reply | Top | Edit yea i got a bulb out ill let u know cuz my inop light is on.....i gotta replace it tomorrow....ill let u guys know tomorrow...that and my low coolant lights on...but theres plenty.... --  Posted By: SaD1ST1K On: 05-30-2007 @ 16:36:49 Reply | Top | Edit by the way i just dropped the new bulbs in and the light went off...thanks guys. --  Posted By: jcraftz28 On: 06-06-2007 @ 14:53:25 Reply | Top | Edit well srry its took so long for an up date, the reason the light was on was cuz i took the spoiler off to get it ready and test fit a 98-02 ss spoiler before sending it to paint. well i got it back on monday and drove it straight home and with the new spoiler in place and the third brake light working im still getting the abs light. do i need to modify something to get the light off or do i need to open the dash up and take that little bulb out....lol... any suggestion? -- 1994 camaro z28 M6, 130k miles/http://www.cardomain.com/ride/2459821/ flowmaster, bbk headers, Moroso cold air intake, bbk throttle body 58 mm, Richmond 3.73 gear,MSD Ignition, MSD coil, no air pump, no cat, alum. driveshaft, drilled and slotted rotors... Posted By: HBHRacing On: 06-06-2007 @ 15:42:53 Reply | Top | Edit You need to induce a load on the circuit since the LED's draw very few amps. You can pick up a loading diode from most parts stores. -- Owner of HBHRacing.com Xtreme performance products Click for new Fbody Tech Articles  Posted By: jcraftz28 On: 06-07-2007 @ 12:16:31 Reply | Top | Edit is there a style,size,or something a little more specific that i should know before going to the autozone??? (i dont want to look like an idoit... -- 1994 camaro z28 M6, 130k miles/http://www.cardomain.com/ride/2459821/ flowmaster, bbk headers, Moroso cold air intake, bbk throttle body 58 mm, Richmond 3.73 gear,MSD Ignition, MSD coil, no air pump, no cat, alum. driveshaft, drilled and slotted rotors... Posted By: mongoose5645 On: 06-17-2008 @ 21:03:07 Reply | Top | Edit I know this is an old thread, but I have the exact same problem..I added an SS style spoiler with the LED 3rd light and not have a flashing "ABS inop" light. A loading diode was mentioned. What are the specifics of this and the best place to get it? Thanks -- 1993 Z28, Eibach Pro kit, KYB adjustable shocks & struts, custom boxed rear control arms and panhard rod, strut brace. 18" C5 rims wrapped in Toyo T1-R's Posted By: mongoose5645 On: 06-17-2008 @ 21:13:21 Reply | Top | Edit Ok, so I found another thread here with this link http://shbox.com/1/relay_for_ss_spoiler.jpg am I just taking 87, 87a, and 30 out of the circuit, like pulling the wires from the harness at the fuse block? or am I missing something? Thanks -- 1993 Z28, Eibach Pro kit, KYB adjustable shocks & struts, custom boxed rear control arms and panhard rod, strut brace. 18" C5 rims wrapped in Toyo T1-R's Posted By: jcraftz28 On: 06-18-2008 @ 15:17:59 Reply | Top | Edit thats what i did! --  
1994 camaro z28 M6, 130k miles/http://www.cardomain.com/ride/2459821/ flowmaster, bbk headers, Moroso cold air intake, bbk throttle body 58 mm, Richmond 3.73 gear,MSD Ignition, MSD coil, no air pump, no cat, alum. driveshaft, drilled and slotted rotors... Posted By: mongoose5645 On: 06-18-2008 @ 19:05:37 Reply | Top | Edit cool, thanks -- 1993 Z28, Eibach Pro kit, KYB adjustable shocks & struts, custom boxed rear control arms and panhard rod, strut brace. 18" C5 rims wrapped in Toyo T1-R's Posted By: mongoose5645 On: 06-20-2008 @ 21:47:39 Reply | Top | Edit Ok so disconnecting those wires made the abs inop light stop blinking..and instead stays on solid. What am I missing in that diagram in the link above? any help would be appreciated cause that blinking light gets annoying really fast -- 1993 Z28, Eibach Pro kit, KYB adjustable shocks & struts, custom boxed rear control arms and panhard rod, strut brace. 18" C5 rims wrapped in Toyo T1-R's Posted By: jcraftz28 On: 06-23-2008 @ 11:14:32 Reply | Top | Edit there is no disconnecting of wires.. its easy. take and open your rear hatch, take the covers off the hatch so that the spoiler bolts are showing. there will be 2 wires coming from the spoiler. go buy a fuel pump relay or some other general relay. and run the 86 side of the relay to one wire and 85 to the other. this will turn of the light and evertime you hit the brakes u will here a click from the relay. --
1994 camaro z28 M6, 130k miles/http://www.cardomain.com/ride/2459821/ flowmaster, bbk headers, Moroso cold air intake, bbk throttle body 58 mm, Richmond 3.73 gear,MSD Ignition, MSD coil, no air pump, no cat, alum. driveshaft, drilled and slotted rotors... Posted By: 1993LT1 On: 06-24-2008 @ 11:06:26 Reply | Top | Edit "yea i got a bulb out ill let u know cuz my inop light is on.....i gotta replace it tomorrow....ill let u guys know tomorrow...that and my low coolant lights on...but theres plenty...." The low coolant light isn't anything to worry about. It is a common problem with the sensor. Best bet is to replace the coolant sensor, or just disconnect it.
|
||||
| If it looks (c) it probably is - All work done by James Hogan | ||||
