Back to Topic Listing Switch to

[ Post New Message | Reply | Edit Profile | Register | Search | Current Connections | Message Board FAQ | Lost Password? ]

 << Previous Thread - Used Stock LS1 Headers and Y Pipe   Next Thread - Convertible Top Cover? >> 

Tapping noise in LS1

Posted By: deathofseasonsLS1 On: 05-14-2008 @ 00:57:34         Reply | Edit
So recently my motor started having a tapping noise come from it. I thought it could be just a lifter tapping, but normaly it goes away after 20-40 seconds right? Well mine goes on untill it gets to running temp. and even then it still taps a little bit under 1500rpms, anything above that it goes away. Does anyone know what it could possibly be, and have any solutions to it. If it is a lifter tapping would a thicker oil help it any, and if it is a lifter should I replace it or worry about it? I'm running Royal Purple 5w-30 full synthetic, and Lucas Full Synthetic additive.

Posted By: Fury_786 On: 05-14-2008 @ 09:07:50     Reply | Top | Edit
piston slap

its an LS1 thing
--

2002 Camaro M5, FTW [Whisper Lid][K&N][Flowmaster][B&M Shifter][3:42's, posi][TB Spacer][BMR STB][Adj. Panhard by Fury ][Built T-5][Alum. 3.5" DS w/1350 Dana’s][HP Tuned by Fury ][100 shot wet kit][Pacesetter's][SLP LL's][Lakewood LCA's][Poly TM][180*][iCAT][MSD 8.5's][NGK Iridiums][3" Cutout][ST 1.75" drop][fra mods]


Posted By: Silver2000WS6 On: 05-14-2008 @ 21:15:32     Reply | Top | Edit

My car runs the same way.Just hit 87000 miles.
--

2000 WS6 Trans AM 12.9@ 108 MPH 1994 25th Trans AM P-1SC Procharger 8 LBS Boost. Twin Intercoolers.

Posted By: 91RS383 On: 05-19-2008 @ 09:47:20     Reply | Top | Edit
Mine does it too. Like Fury said, it's an LS1 thing. It's down right nerve racking hearing it from under the car. The sound resonates through the oil pan.
--


Posted By: TransAm64 On: 05-20-2008 @ 00:01:29     Reply | Top | Edit
Welcome to the LS1 world....Look @ it this way....it's not a v-6. They all do it.....no biggie.
--
00' Trans Am convertible, M6 ,K&N, Edelbrock exhaust. SLP Loudmouth coming soon.


Posted By: 94fireturd On: 05-27-2008 @ 23:20:12     Reply | Top | Edit
Mine did this exact same thing as others have posted. Did when I bought my car with 64K miles and at around 100K miles I started using Amsoil 10w-30. With the amsoil I couldnt hear it any more.
--

94 Formula: sold
00 WS6: sold
1993 Z28: CIA, Hooker LT's, Mufflex Y,!EGR!AIR!CATS

Posted By: rnrkid On: 05-31-2008 @ 06:05:52     Reply | Top | Edit
You should hear it with a bent pushrod thrown in. Not cool!
--
2000 WS6 M6, Volant Cold Air, SLP Y-pipe and LM cat back, SLP subframe connectors, BMR panhard relocator,UMI LCA, UMI Adj. upper and lower a-arms, B&G lowering springs, UMI torque arm, ported and polished throttle body, 12 bolt Moser w/3.73's, cross-drilled vented rotors.
http://www.cardomain.com/ride/2355847

Posted By: TBone On: 06-06-2008 @ 00:03:37     Reply | Top | Edit
Using the AMsoil solved it ?
--


Posted By: crispytoast On: 06-08-2008 @ 23:53:46     Reply | Top | Edit
mine was making the same kind of noise...the dealership said that it was a worn out lifter. They replaced the whole longblock for a worn out lifter but i didn't care...it was under warranty

 << Previous Thread - Used Stock LS1 Headers and Y Pipe   Next Thread - Convertible Top Cover? >> 

Reply to this Message
UserName: [ Not a member? Register here! ]
Password: [ Edit Profile ] [ Logout ]
Message:

Check the box to be notified via e-mail when a reply is posted to this thread. Members who are logged in can enable the notify option without posting a message.
Use Signature:

Back To Topic List


If it looks (c) it probably is - All work done by James Hogan