| ||||
|
[ Post New Message | Reply | Edit Profile | Register | Search | Current Connections | Message Board FAQ | Lost Password? ]
gears Posted By: krayz28 On: 01-03-2008 @ 22:09:59 Reply | Edit What would i need to change out my gears to 373 and would it be recomendable? -- 98 Z28 M6 basic free mods stock for rightnow Posted By: BlackScreaminMachine On: 02-12-2007 @ 08:12:57 Reply | Top | Edit If your even thinking about a cam you need the 4.10's/4.11's If your asking a question like this. GO to a good shop and have them do it. -- 2002 Navy Blue Metallic Trans-Am, 6 Speed, Leather, T-tops. SLP Flow Pack, M/T Street Radials, Free Mods, otherwise stock. Moser 12-bolt and BMR Suspension soon to be installed. 
"Miles Per Hour is not a distance that you can race"-Ronald Bastura Posted By: 98ls1 On: 02-15-2007 @ 23:21:44 Reply | Top | Edit would 373's be good on a A-4 car I think 410's would be to much gear, for just bolt ons -- ima://Documents%20and%20Settings/MOM/My%20Documents/My%20Pictures/Picture%20or%20Video/Picture%20or%20Video%20202.jpg Posted By: fast82Z On: 02-16-2007 @ 00:52:38 Reply | Top | Edit An a4 car could probably use 4.10's on the track, but will likely have the motor reving higher than you may like on the freeway. Try using one of the calculators at http://www.fbody.com/calc.htm For an automatic on the 1/4 mile, use 1.1 as the trannsmission gear, your tire size, trap speed, and rear gear to give you rpm's through the traps. For an automatic on the freeway, use .7 for the transmission gear, then the same everything else to give you cruising rpms. -- The crap gas wonder: 1982 Z28, forged 10:1 383, ported 23* trick flow heads, 246/254 .558/.558 hyd. roller, 3.73's, 3500 stall 11.44@117.8, 405rwhp, 337rwtq Video: http://s50.photobucket.com/albums/f305/fast82z/?action=view¤t=fast82z20062.flv AIM:CHATV400, Video of HID vs Halogen: http://s50.photobucket.com/albums/f305/fast82z/?action=view¤t=HIDvsHalogen.flv  
|
||||
| If it looks (c) it probably is - All work done by James Hogan | ||||
