Back to Topic Listing Switch to

[ Post New Message | Reply | Edit Profile | Register | Search | Current Connections | Message Board FAQ | Lost Password? ]

 << Previous Thread - Central Florida?   Next Thread - Oct. 30th dyno day, North Royalton Ohio >> 
Oct 9, 10 Dyno day changed to 23,24

Posted By: dynoguy04 On: 01-04-2008 @ 17:57:27         Reply | Edit
Sorry, we had something come up and had to change the date! This one is rock solid. $50 for 2 pulls $65 with the wideband O2. Time is from 9-3 or until everyone is dynoed! Lemme know if you need directions. Were off Rte 611 in Plumsteadville PA.
Posted By: rogue13 On: 04-05-2005 @ 23:06:54     Reply | Top | Edit
wait are you the guys right next to the overpass for pt pleasant pike? there is a place right there on 611 i drive past all the time and see the "dynojet" flag on the chain link fence.


wow thats wierd. i'd come but im poor, i may stop by and see if anyone shows up and just hang around and watch. I work at the wawa 2 minutes up the street if its the same place im thinking of
--
'96 Red Trans Am-- TB bypass, Moroso CAI, BMR adjustable pan hard rod, LPE 3.5in aluminum driveshaft, 1LE elbow, LT4 KM, BMR tubular Subframes, SLP airfoil, Hooker super competition shorty headers, hooker super competition cat-back (3" inlet dual 2.5" outlets w/stock tips ), NGK TR55s, ST 35mm front sway bar, CSI electric WP, Delteq Opti-direct ignition system, Hotchkis STB

"Le Diable Rouge"
Posted By: dynoguy04 On: 04-05-2005 @ 23:27:00     Reply | Top | Edit
Yep, we're the 2nd bay in from rte 611. You're more than welcomed to come down and hang out and see what shows up!
Posted By: rogue13 On: 04-05-2005 @ 23:44:12     Reply | Top | Edit
cool maybe ill stop in. i tend to work more hours a day then i sleep though so no promises

have you advertised on other message boards? any success? most people dont look at this area of our site its the least used forum, but if you try to post in any of the other areas it gets moved or deleted
--
'96 Red Trans Am-- TB bypass, Moroso CAI, BMR adjustable pan hard rod, LPE 3.5in aluminum driveshaft, 1LE elbow, LT4 KM, BMR tubular Subframes, SLP airfoil, Hooker super competition shorty headers, hooker super competition cat-back (3" inlet dual 2.5" outlets w/stock tips ), NGK TR55s, ST 35mm front sway bar, CSI electric WP, Delteq Opti-direct ignition system, Hotchkis STB

"Le Diable Rouge"
Posted By: dynoguy04 On: 04-05-2005 @ 00:20:47     Reply | Top | Edit
Just Ls1.com. Feel free to spread the word!
 << Previous Thread - Central Florida?   Next Thread - Oct. 30th dyno day, North Royalton Ohio >> 

Reply to this Message
UserName: [ Not a member? Register here! ]
Password: [ Edit Profile ] [ Logout ]
Message:

Check the box to be notified via e-mail when a reply is posted to this thread. Members who are logged in can enable the notify option without posting a message.
Use Signature:

Back To Topic List
If it looks (c) it probably is - All work done by James Hogan