| ||||
|
[ Post New Message | Reply | Edit Profile | Register | Search | Current Connections | Message Board FAQ | Lost Password? ]
3rd gen trivia! Posted By: Pocket On: 09-06-2009 @ 10:14:22 Reply | Edit Lets play a little game with this ad http://www.thirdgen.org/techboard/engine-drivetrain-parts-sale/541003-complete-tpi-system-off.html Name 5 of the 6 blatantly obvious things that prove this was an Fbody setup rather than a vette, and it was an 87 setup vs 89 The filter box thing doesnt count as he states it Posted By: GOATS2QUICK On: 09-06-2009 @ 12:18:47 Reply | Top | Edit im no fbody guru, ill take a guess pulley setup and bracket maf manifold cold start injector fuel lines throttle body distributor and coil? wtf? --  Posted By: Pocket On: 09-06-2009 @ 22:03:53 Reply | Top | Edit Pulley's correct 87 was the only year you could have the serp/v-belt combo on a TPI. 85-86 was V belt (few late 86's got the combo) 88-92 were full serp MAF isnt, vettes had MAF and SD setups Lower manifold is correct as the vette had no EGR provisions. You can see the block off plate and hole in the intake gaskets Cold start is correct as the vettes were without Fuel lines also correct. Vettes were pass rear exit and fbody dr front TB? Those didnt change even when they swapped to LTx Older TPI and all Vettes used the large cap HEI dist The 6 I saw: EGR manifold Fbody rails Cold start bung Old belt stup (Could be vette but definitely not an 89 as listed) C207 wiring connector Non sealed ECM. All vettes had an engine bay mounted ECM which required waterproofing. Fbodys were all in-dash units which did not require waterproofing
|
||||
| If it looks (c) it probably is - All work done by James Hogan | ||||
