Back to Topic Listing Switch to

[ Post New Message | Reply | Edit Profile | Register | Search | Current Connections | Message Board FAQ | Lost Password? ]

 << Previous Thread - sfc   Next Thread - 3rd gen dash pad rattle >> 
Tranny Question

Posted By: l98s10 On: 05-07-2008 @ 19:58:02         Reply | Edit
I know this has been brought before. I have a 87 GTA with a L98 and a 700r4. My question is that when I go to pull out it does what to shift in to 2nd gear in till it gets to a high rpm. And it is the same for 3rd. If you hold to the floor going down the road it shifts fine. I know that the speed sensor is messed up but I didn't think that would do anything with the lower gears. I tried to adjust the TV cable but I don't know witch way to go with it. I don't want to trash the tranny by driving to adjust the cable. So if it's the cable witch way do you adjust it. Your could it be something else. Thanks
Posted By: Pocket On: 05-08-2008 @ 02:16:12     Reply | Top | Edit
How to adjust
http://www.thirdgen.org/detent

More than you ever wanted to know about TV cables
http://www.tvmadeez.com/article/index.php


A bad VSS signal will screw with the ECM, but not so bad that shifting is comprimised
--
"If you have complete control over the damned thing, you're not going fast enough." - Carrol Smith
 << Previous Thread - sfc   Next Thread - 3rd gen dash pad rattle >> 

Reply to this Message
UserName: [ Not a member? Register here! ]
Password: [ Edit Profile ] [ Logout ]
Message:

Check the box to be notified via e-mail when a reply is posted to this thread. Members who are logged in can enable the notify option without posting a message.
Use Signature:

Back To Topic List
If it looks (c) it probably is - All work done by James Hogan